Standard Installation

Every EV charge point installation we carry out includes a Standard Installation. When we provide you with your quote, we will let you know if there are any additional costs on top of the Standard Installation package.

​

The Standard Installation Package Includes:

• The fitting of your selected Charge point on a brick or plaster wall, or other suitable permanent structure.

• Routing of the cable through a drilled hole in a wall up to 500mm (20 inches) thick, where required.

• Up to 10 meters of cable, run and neatly clipped to the wall between the distribution board and the charge point.

• All electrical connections at the origin of the supply and charge point.

• Installation of a Type C MCB.

• Up to 3 meters (10 feet) of plastic conduit or trunking to conceal interior wiring.

• Electrical testing and the NICEIC Certification.

• Demonstration of the charge point functions and App (if applicable)

 

What can increase the cost of your EV charge point installation?

There are a number of factors, but here are a few examples that can increase the cost of your installation:

• Earth rod - some charge points and properties require an earth rod to be installed.

• Extra cabling - if more cabling over the 10 meters already included is needed then this will cost extra.

• Type A RCD/RCBO - this is a protective device required for some installations to protect against current overload, AC and DC leakage.

• Dedicated two-way distribution board - this may be required if your present fuse box is incompatible or has no "spare ways" 

• The fitting of and a recommended SPD - surge protection device.

• 100A Henley blocks for splitting the tails.

• Additional labour - for more complex installations or for jobs that will simply take longer (above the four hours included).

• Installing cables in external trenches or installing under floors, in walls or lofts.